U.S. Coast Guard Approved
Since 1978, Seasafe Fiberglass Cable Tray and Cable Raceway Systems have been tested and proven in the harsh environment of the offshore oil and gas industry. Subject to the corrosive conditions inherent in petroleum products, plus the daily punishment of exposure to wind, weather and saltwater – Seasafe Cable Tray and Cable Raceway have stood up!
Seasafe Cable Tray and Cable Raceway gives you the load capacity of steel plus the inherent characteristics afforded by our in-house Pultrusion Technology: non-conductive, non-magnetic and corrosion-resistant. Although light in weight, their strength-to-weight ratio surpasses that of equivalent steel products. Seasafe Cable Tray and Cable Raceway will not rust, nor do they ever require painting. Available in both polyester and vinylester resin systems,
Seasafe Cable Tray and Cable Raceway are manufactured to meet ASTM E-84, Class 1 Flame Rating and self-extinguishing requirements of ASTM D-635.
A surface veil is applied during the pultrusion process to ensure a resin-rich surface for superior corrosion resistance as well as an ultraviolet exposure barrier. Cable Tray and Cable Raceway come in two colors; Gray (polyester resin) and Beige (vinylester resin). Custom colors are available on request.
The NEMA loadings are load-tested in accordance with NEMA FG-1 guidelines.
Gangway Ladder Tray Numbering System
Straight Sections
(All tray tested per NEMA FG-1)
6″ side rail systems offer a NEMA 5″ loading depth.
Series 6BLoading - NEMA 20B | Available Widths: 6" - 9" - 12" - 18" - 24" - 30" - 36" |
Series 6CLoading - NEMA 20C-S.F. 1.5 | Rung Spacing: 6" - 9" - 12" - 18" |
Series H6CLoading - NEMA 20C-S.F. 2.0 | Length: 120" (10') 240" (20') |
4″ side rail systems offer a NEMA 3″ loading depth.
Series 4Loading - NEMA 12C | Available Widths: 6" - 9" - 12" - 18" - 24" - 30" - 36" Rung Spacing: 6" - 9" - 12" - 18" Length: 120" (10') 240" (20') |
3″ side rail systems offer a NEMA 2″ loading depth.
Series 3Loading - NEMA 8C | Available Widths: 6" - 9" - 12" - 18" - 24" - 30" - 36" Rung Spacing: 6" - 9" - 12" - 18" Length: 120" (10') 240" (20') |
Fittings
(Available for 6″, 4″ and 3″ Series)
Width:
6″
9″
12″
18″
24″
30″
36″
Angle:
30º
45º
60º
90º
Radius:
12″
24″
36″
Type:
HB – Horizontal Bend
HX – Horizontal Cross
HT – Horizontal Tee
VI – Vertical Inside Bend
VO – Vertical Outside Bend
VTU – Vertical Tee, Up
CSF – Cable Support Fitting
Type:
VT – Vertical Tee
RR – Right Reducer
LR – Left Reducer
SR – Straight Reducer
HYL – Horizontal Wye, Left
HYR – Horizontal Wye, Right
Width:
6″
9″
12″
18″
24″
30″
36″
Angle:
30º
45º
60º
90º
Radius:
12″
24″
36″
Type:
HB – Horizontal Bend
HX – Horizontal Cross
HT – Horizontal Tee
VI – Vertical Inside Bend
VO – Vertical Outside Bend
VTU – Vertical Tee, Up
CSF – Cable Support Fitting
VT – Vertical Tee
RR – Right Reducer
LR – Left Reducer
SR – Straight Reducer
HYL – Horizontal Wye, Left
HYR – Horizontal Wye, Right
Ladder Tray Gallery
Ladder Tray Accessories
Part Number with Hardware Explanation
Examples: XSS-0000*
indicates that additional information must be furnished to specify the type of hardware.
Hardware Option | 316 Stainless Steel | Monel | Silicon Bronze | Fiberglass | Fiberglass Encapsulated SS Hdw. |
Replace with | SS6 | MO | SB | FR | ES6 |
Standard Splice Plates
Included in needed quantities with tray section
* Order only pairs of splice plates needed for field fabrication.
* SS6 hardware supplied as standard – use SS6 suffix.
* Other hardware available, specify by hardware suffix. Hardware other than SS6 is considered special.
* hardware suffix needed to complete part number
Expansion Splice Plates
* hardware suffix needed to complete part number
Tray to Box Splice Plates
These plates are used to attach the end of a tray run to a distribution box or control center.
* furnished in pairs
* hardware suffix needed to complete part number
Not available in stainless steel.
Blind End Plate
This plate forms a closure for any tray that dead ends.
* furnished as on plate
* W = tray width
* hardware suffix needed to complete part number
Step Down Plates
These splice plates provide for changes in side rail heights.
* furnished in pairs
* hardware suffix needed to complete part number
Not available in FRP.
Vertical Adjustable Splice Plates
These plates provide for changes in elevation that do not conform to standard vertical fittings.
* furnished in pairs
* hardware suffix needed to complete part number
Not available in FRP.
Horizontal Adjustable Splice Plates
These plates provide for changes in the horizontal direction that do not conform to standard fittings.
* furnished in pairs
* hardware suffix needed to complete part number
Not available in FRP.